Sink marks in injection-molded parts can be a real headache, right? As a supplier of injection machines, I've seen this problem pop up time and time again. But don't worry! I'm here to share some tips on how to eliminate those pesky sink marks and get high-quality injection-molded parts.
Understanding Sink Marks
First things first, let's talk about what sink marks are. Sink marks are small depressions or indentations that appear on the surface of injection-molded parts. They usually happen when the material inside the part shrinks more than the outer layer during the cooling process. This uneven shrinkage causes the surface to cave in, creating those unsightly marks.
There are a few factors that can contribute to sink marks. One of the main ones is the thickness of the part. If a part has thick sections, the material in those areas takes longer to cool and shrink. This can lead to a difference in shrinkage rates between the thick and thin sections, resulting in sink marks. Another factor is the injection molding process itself. Things like improper packing, cooling, or holding pressure can also cause sink marks.
Adjusting the Injection Molding Process
Now that we know what causes sink marks, let's talk about how to fix them. One of the first things you can do is adjust the injection molding process. This includes things like the injection speed, pressure, and temperature.
Injection Speed: A slower injection speed can help ensure that the material fills the mold evenly. This can reduce the chances of uneven shrinkage and sink marks. However, you don't want to go too slow, or the material might start to cool before it fills the mold completely.
Injection Pressure: Increasing the injection pressure can help pack the material more tightly into the mold. This can reduce the amount of shrinkage and prevent sink marks from forming. But be careful not to overdo it, as too much pressure can cause other problems like flash or warping.
Temperature: The temperature of the mold and the material also plays a crucial role. If the mold is too cold, the material might solidify too quickly, leading to uneven shrinkage. On the other hand, if the mold is too hot, the material might take longer to cool, increasing the risk of sink marks. You need to find the right balance for your specific material and part design.
Optimizing the Part Design
Another way to eliminate sink marks is to optimize the part design. This involves making sure that the part has a uniform wall thickness as much as possible. As I mentioned earlier, thick sections are more prone to sink marks because they take longer to cool and shrink. By reducing the thickness variations in the part, you can minimize the difference in shrinkage rates and prevent sink marks from forming.
If you can't avoid having thick sections in your part, you can try adding ribs or bosses to reinforce those areas. These features can help distribute the material more evenly and reduce the amount of shrinkage. You can also consider using a different material that has a lower shrinkage rate.
Using the Right Injection Machine
Of course, having the right injection machine is also essential. At our company, we offer a wide range of Plastic Injection Moulding Machine that are designed to produce high-quality injection-molded parts. Our machines are equipped with advanced features and controls that allow you to fine-tune the injection molding process and minimize the risk of sink marks.
For example, our Automatic PET Bottle Preform Injection Moulding Machine is specifically designed for producing PET bottle preforms. It has precise temperature and pressure controls that ensure consistent and high-quality results. Our Customer Design PET Preform Injection Molding Machine also allows you to customize the machine according to your specific requirements, giving you more flexibility and control over the production process.
Cooling and Post-Processing
Proper cooling is also crucial for eliminating sink marks. After the part is injected into the mold, it needs to be cooled evenly and at the right rate. This can help ensure that the material shrinks uniformly and prevent sink marks from forming. You can use a cooling system, such as water or air cooling, to control the temperature of the mold and the part.
In some cases, you might also need to perform post-processing on the part to remove any remaining sink marks. This can include things like sanding, polishing, or painting. However, post-processing should be used as a last resort, as it can add time and cost to the production process.
Conclusion
Eliminating sink marks in injection-molded parts requires a combination of proper part design, process optimization, and the right injection machine. By following the tips I've shared in this blog, you can significantly reduce the risk of sink marks and produce high-quality injection-molded parts.


If you're looking for an injection machine that can help you achieve these results, we'd love to hear from you. We have a team of experts who can provide you with personalized advice and support to help you choose the right machine for your needs. Whether you're a small business or a large manufacturer, we have the solutions to meet your injection molding requirements. So, don't hesitate to reach out and start a conversation with us. Let's work together to take your injection molding production to the next level!
References
- "Injection Molding Handbook" by O.C. Strandjord
- "Plastics Materials and Processes" by Donald V. Rosato and Dominick V. Rosato
