Most machines faulty is caused of careless maintenance or lack of routine checking. Good maintenance is very important in prolonging the life of the machine and avoiding accidents.
1) Maintenance
A. Drain water divider regularly
B. Ensure the oil atomizer never lack #20 machine oil. Change once a week is recommended
C. Check the Limit switch regularly D. Keep the machine clean to prevent damage to the components.
2) Troubleshooting
Some solution for machine faulty
| Problem Reason Solution | ||
| Mould clamping not working | Electric magnetic Valve power off | Check circuit and starting switch |
| Pressure is too low | Increase cylinder pressure | |
| Cylinder sealing ring leaks | Change sealing rings | |
| No stretching action or stretches too slow | Pressure not sufficient | Increase pressure |
| Cylinder leaks | Change sealing rings | |
| No blowing action | Blow valve power not connected | Check circuit and blow valve |
| Air pipe damage or connection loose | Adjust or change the pipe | |
