Knowledge

What processes are involved in plastic injection molding?

Mar 17, 2019 Leave a message

The main precautions for plastic injection molding and the processes involved:

First, the injection molding product molding cycle, which includes the injection time and product cooling time, the effective control of these times has a profound impact on the quality of the product.

Before injection molding, we should clarify the product molding cycle by sample pattern and other methods.


Second, the temperature of the injection mold, different plastic particles, the temperature and speed of the crystallization are not the same, and the appearance, deformation, size, plastic mold, etc. of the product have different requirements;

This makes the mold temperature control different when using different plastics, product requirements, etc.


Full automatic PET stretch blow moulding machine for edible oil bottle 3


Third, the injection pressure of molten plastic, plastic in the process of filling the mold cavity is facing a lot of resistance, which makes the size of the injection pressure directly determines the size, weight, density, appearance and so on!

If any of these factors are affected, then the product becomes a scrap. This requires the injection engineer to reasonably define the injection pressure control based on the combined factors of the product.


Fourth, the injection speed, the speed of the injection speed has an important impact on the appearance quality of the product.

The injection speed is generally achieved by adjusting the amount of oil supplied to the injection cylinder per unit time.


Fifth, the temperature of the barrel and the temperature of the melt. The temperature of the melt can be measured at the nozzle or by the air jet method. The melt temperature plays a major role in the flow properties of the melt;

The plastic has no specific melting point, and the melting point is a temperature range in a molten state.

The control of both temperatures also plays a crucial role in the quality of the product.


Send Inquiry